Signs your siding took storm damage
Storm damage isn't always as obvious as a missing panel. Some of the most costly damage is the kind that's easy to miss from the ground, which is why a walk-around after any significant weather event is worth doing even if nothing looks wrong at first glance.
Look for panels that have bowed outward or developed a visible wave, since that usually means fasteners have pulled loose from sustained wind pressure. Cracks near the bottom edge of a panel often point to hail or debris impact, even when the crack itself is small. Seams that have separated slightly, gaps at corner posts, and trim that feels soft when pressed are all signs that water has already started working its way behind the surface. Any of these signs are worth a call, even if the damage looks minor from where you're standing.
What's included in a storm damage repair
A storm damage repair covers everything from the initial assessment through the finished, sealed result. That includes identifying every affected section, not just the most visible one, since storm damage tends to cluster on the side of the house that took the brunt of the wind. It includes removing and replacing panels that are cracked, punctured, or too warped to reseal properly, along with any trim, corner post, or flashing that was compromised in the same event.
If the moisture barrier underneath the siding was exposed to weather before the repair began, restoring that layer is part of the scope as well, not an add-on discovered later. The repair isn't considered complete until every seam in the affected area has been checked and confirmed watertight.
Step-by-step walkthrough
Report the damage
A quick call gets your address into the schedule, along with any details you can share about which side of the house took the damage.
On-site inspection
A technician walks the full exterior, not just the reported spot, since storm damage often extends further than what's visible from the yard.
Document the scope
Every affected panel, seam, and trim piece is noted, which also gives you a clear record if you're working through an insurance claim.
Remove and replace
Compromised sections are removed and replaced with material matched to your existing siding, installed to the manufacturer's fastening specification.
Restore the barrier layer
Where the moisture barrier was exposed during the storm, it's repaired or replaced before new siding goes back over it.
Seal and confirm
Every seam is checked for a tight seal before the job is considered finished, closing off the exposure the storm created.
What influences the scope of the repair
No two storm events cause identical damage, so scope varies based on a few factors. The number of affected panels matters most, along with whether the damage is contained to the surface layer or reached the moisture barrier underneath. Wind direction during the storm often determines which side of the house needs the most attention, and older siding that was already near the end of its service life tends to show more damage from the same event than newer material would.
The technician's on-site assessment is what actually determines scope, not a guess made over the phone, which is why an in-person look is always the first step before any repair work begins.
Standards this team holds to
Licensed and insured
Every job is performed under proper licensing and insurance coverage for your protection.
Factory certification
Installers are certified directly by the manufacturers of the materials they work with.
Manufacturer specification
Fastening, overlap, and sealing follow the exact standard the material manufacturer publishes.
Warranty documentation
Parts and labor warranties are provided in writing at the close of every repair.
Common questions about storm damage repair
How soon after a storm should I call?
As soon as it's safe to do so. Even damage that looks minor can let moisture behind your siding, and the sooner it's assessed, the smaller the repair tends to stay.
Will you document the damage for my insurance claim?
Yes, our on-site assessment includes clear documentation of the affected areas, which you can provide to your adjuster alongside our own claim assistance service.
Can hail damage be repaired without full panel replacement?
Sometimes. Small surface cracks can occasionally be sealed in place, but punctures and larger cracks typically require replacing the affected panel to fully restore the seal.
What if only one side of my house was damaged?
That's common after a directional storm. We'll assess the full exterior but only repair what's actually damaged, matching new material to your existing siding.
Do you work with fiber cement and wood, or just vinyl?
All of them. Our crews are certified across vinyl, fiber cement, wood, and metal siding, and are matched to your home's specific material.
What happens if the moisture barrier was also damaged?
It's repaired or replaced as part of the same job before new siding is installed over it, since leaving it compromised would undermine the repair.
Is there a warranty on storm repair work?
Yes, every repair carries the manufacturer's parts warranty along with our own labor warranty, both documented in writing.
What should I avoid doing before the crew arrives?
Avoid climbing on damaged sections or attempting a DIY patch with tape or sealant, which can sometimes trap moisture rather than block it.